Connecting A Usb Device; Connecting Your Usb Device To The; Receiver; Basic Playback Controls - Pioneer VSX-820-S Mode D'emploi

Other connections

Connecting a USB device

It is possible to listen to two-channel audio
using the USB interface on the front of this
receiver. Connect a USB mass storage device
as shown below.
• Push down on the PUSH OPEN tab to
access the USB terminal.
CONTROL ON / OFF
VIDEO INPUT
iPod
iPhone
USB
VIDEO L AUDIO R
USB mass
storage device

Connecting your USB device to the

receiver

1 Switch on the receiver and your TV.
2 Press iPod USB on the remote control to
switch the receiver to the iPod USB.
NO DEVICE appears in the OSD.
3 Connect your USB device.
The USB terminal is located on the front panel.
Loading appears in the OSD as this receiver
starts recognizing the USB device connected.
After the recognition, a playback screen
appears in the OSD and playback starts
4
automatically.
Note
1 This includes playback of WMA/MP3/MPEG-4 AAC files (except files with copy-protection or restricted playback).
2 • Compatible USB devices include external magnetic hard drives, portable flash memory (particularly keydrives) and digital
audio players (MP3 players) of format FAT16/32. It is not possible to connect this receiver to a personal computer for USB
playback.
• Pioneer cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and assumes no
responsibility for any loss of data that may occur when connected to this receiver.
• With large amounts of data, it may take longer for the receiver to read the contents of a USB device.
3 Make sure the receiver is in standby when disconnecting the USB device.
4 • If the file selected cannot be played back, this receiver automatically skips to the next file playable.
• When the file currently being played back has no title assigned to it, the file name is displayed in the OSD instead; when
neither the album name nor the artist name is present, the row is displayed as a blank space.
• Note that non-roman characters in the playlist are displayed as *.
1
MASTER
VOLUME
MCACC
SETUP MIC
This receiver
3
 P L AY
U S B
M P 3
R e l a x Yo u r B o d y
K e v i n J a c k s o n
2
W e a r e a l l o n e
   3 2 k b p s

Basic playback controls

The following table shows the basic controls
on the remote for USB playback. Press iPod
USB to switch the remote control to the iPod
USB operation mode.
Button What it does

Starts normal playback.

Pauses/unpauses playback.
/
Press to skip to previous/next track.
 
/ Press and hold during playback to
start scanning.
Press repeatedly to switch between
Repeat Folder, Repeat One and
Repeat All.
Press repeatedly to switch between
Shuffle On and Shuffle Off.
DISP
Press repeatedly to change the song
playback information displayed in the
(DISPLAY)
front panel display.
/
During playback, press to skip to
previous/next track.
/
TOP MENU Press to return to the menu screen.
RETURN Press to return to the previous level.
File/Folder number
File format
0 0 1 / 0 0 4
Repeat or Shuffle
R : F l d S : O n
Song name
Artist name
Album name
Elapsed time
0 : 0 1
R e t u r n
Bit rates
10
69
En