Télécharger Imprimer la page

ARENDO WBA380 Mode D'emploi page 10

Publicité

Les langues disponibles
  • FR

Les langues disponibles

4 Getting started
Please remove the kettle and the base plate from the packing and clean the unit
with a damp cloth. Afterwards connect the kettle to a properly installed grounded
socket. Before regular use, fill the water reservoir with cold water to its maximum
level and boil according the following instructions. Thereafter discard the water
in order to remove any residues of the production process. Repeat these process
if necessary..
5 Usage
At first, open the kettle. To do this, pull the cover on the plastic-handle to the top.
Please fill it with cold water. There is a scale on the exterior of the kettle. Please do
not fill the case above the maximum mark. Then put the lid on the kettle.
Note: Please only use the kettle with the lid due to the fact that the automatic
shutdown only works in closed position. Furthermore, when heated without the lid
water can leak. There is a risk of scalding! Place the kettle on the base plate and
press the on / off switch down. The water is heated. Once the water has reached
the target temperature, the kettle shuts off automatically.
6 Decaling and cleaning
We recommend decalcifying the kettle in regular intervals, depending on the inten-
sity of use. Before cleaning, it is essential to remove the power plug from the sock-
et and wait until the device is completely cooled down. The scale filter is located
in front of to the spout. To remove the filter, open the cover and push the plastic
flap downwards. Then deep clean the filter with warm water and reinsert it into
the holder. When inserting the filter, make sure that the retaining lug snaps into
the guide rail. Only use conventional decaling agents based on citric acid. Please
follow the manufacturer´s instructions for dosing the respective product you have
chosen. The base plate must not be cleaned and should not be processed with
sharp or hard objects. For cleaning the outer surface of the kettle, only use a damp
cloth. Never use hard or abrasive objects like a wire brush or a steel-sponge for
cleaning. Please do not use any aggressive cleaning agents which could be harmful
or unhealthy. It also could damage the surface.
10
English

Publicité

loading

Ce manuel est également adapté pour:

300718300719300720300721300722300723