Rear View Camera Operations; Using A Rear View Camera; Activating The Rear View Camera; Displaying The Picture From The Rear View Camera - JVC KW-NT30 Manuel D'instructions

Rear View Camera Operations

Using a rear view camera

• To use a rear view camera, the reverse gear signal lead connection is required. For connecting a rear view camera,
☞ Installation/Connection Manual.

Activating the rear view camera

1
2
3
To deactivate the rear view camera, select <Off>
for <Camera Input>.
Displaying the picture from the
rear view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
To display the operating buttons, touch the screen.
Caution message
Hides/displays the operating buttons
[ ]
on the screen.
Adjusts the picture. (☞ page 65)
[ ]
[Bottom][Top] Adjusts the position of the caution
message.
81