Operating The Device; On/Off Switch - Axion STIM-PRO T-400 Manuel

STIM-PRO T-400

OPERATING THE DEVICE

ON / OFF switch
Open the front lid of the device to reach the controls. The
EN
device can be switched on inreasing the intensity with the
regulators on top of the machine.
Regulating the intensity
The intensity can be adjusted stepless from 0-80mA by
turning the intensity regulators on top of the device.
Connect the electrodes with the connecting cables. The
device must be turned off when connecting the electrodes.
The electrodes must be firmly attached to the skin.
23