ARENDO 303242 Mode D'emploi page 21

4. Initial start-up
Please remove the kettle and base station from the packing and clean the unit with
a damp cloth. Then connect the basis only to a properly installed grounded socket.
Before regular use, fill the water reservoir with cold water to its maximum level
and boil according the following instructions. Thereafter discard the water in order
to remove any residues of the production process. Boil the water by pressing the
"Power" button on the grip. Repeat this two or three times.
This device is designed for household use and similar applications only, such as
for example:
- in employee cafeterias, in stores, offices and other working environments;
- by customers in hotels, motels and other residential facilities;
- in Bed and Breakfast establishments;
- in farm houses.
5. Handling without tea strainer for boiling function
Press the opening button to unlock the cover and remove it. Then fill the Arendo
kettle with cold water and close the cover by pressing down the button until it
locks.
Important note: On the outside there is a scale. Please make sure not to fill in more
than the maximum level as marked on the scale. If the kettle is overfilled, boiling
water can be ejected.
Put the kettle on the base. On the grip there are buttons for selecting different wa-
ter temperatures. Press the "Power" button to start the kettle, choose your desired
temperature by pressing "+/-" button. The kettle will start boiling automatically af-
ter three seconds. As soon as the water reaches the target temperature, the kettle
switches off and it will produce two short beeps. The heating element switches off
automatically and the process has been completed. Now the unit can be lifted up
and the water can be used.
21
English