Before Operation; Included In Delivery - IBP TD 3213 Mode D'emploi

3 before operation

the blood sugar/pressure measuring system
Your blood sugar/pressure measuring system can be used to measure blood sugar levels up to a height
of 3275 m above sea level without affecting the test results. The blood sugar/pressure measuring
system consists of three components: the blood sugar/pressure measuring device, the test strips and
the control solutions. These components were specially designed to match each other, tested and
quality-confirmed in our R&D department. This enables this measuring device to measure and display
the blood sugar level extremely precisely (whole blood calibrated measurement results). Only use test
strips and control solutions approved for use with this blood sugar measuring device. If you have any
questions about your measured values, please contact your doctor.

included in delivery

The following parts are included in delivery and are contained in the packaging:
- 1 blood sugar measuring device
- 25 sterile lancets
- 1 check code strips
- 1 instruction manual
- 1 practical storage box
Caution:
Check that the box packaging seal is unbroken! If the seal has been broken or is mis-
sing, please return the device to your dealer immediately.
4
- 25 test strips
- 1 pricking aid
- 2 different control solutions
- 1 quickstart guide with troubleshooting
- 2 1.5 V alkaline batteries size AAA