Instructions Part; Robot Features Continued; Disc Firing - THINK GIZMOS TG542 ROBO SHOOTER Mode D'emploi

3. INSTRUCTIONS PART 2

3.1 Robot Features Continued

Walk & Slide Function:
Press the buttons on the controller, the robot will
walk forwand backwards correspondingly.
Press the buttons on the controller, the robot will
slide forward and backward correspondingly.

3.2 Disc Firing

Loading Discs:
As illustrated, pull the head up from the front, and then insert
the discs into the hole.
Please do not use any other objects other than the supplied
discs, if the discs do not fire as expected, take out all discs and
reload them
Arm & Gun Voice Function::
Press the button on the controller, the robot will
lift the gun and say "Freeze! Identify yourself. Or I will
shoot". Press it again and the robot will shoot and say
"Surrender now" You are under arrest".
Press the button and then the
different commands and to make the gun light up.
Firing Discs:
1. Install the discs.
2. Press the 'GO' Button to make sure the robot is
powered on.
3. Press the button on the remote, the robot will say
"Laser On" and the motor will start.
4. Press the button to fire the discs. You can hold
the button for continuous fire.
5. Press the buttons to change the direction the
discs are being fired.
button to hear
5