Usage Instructions; The Remote Control; Setting Controller Channel; Connecting The Motor - THINK GIZMOS TG632 INGENIOUS MACHINES Manuel De L'utilisateur

2. USAGE INSTRUCTIONS

2.1 The Remote Control

CHANNEL NUMBER (1-8)
SET CHANNEL
BUTTON
FORWARD /
BACKWARD
BUTTON

2.2 Setting Controller Channel

If more than one Ingenious machines product is being built and used at one time, for
example two of the cars are built to race each other, then you will need to adjust the
channels on one of the remote controls, otherwise one control will control both built
machines. These simple instructions show you how to adjust the channel on one of the
controllers.
1. Press Key and at the same time press the
2. Release the
3. Choose the channel number by pressing the
number, then press the
been set successfully.

2.3 Connecting The Motor

4
SPECIAL FUNCTION KEY
Key and press the
Key. The
CONFIRM CHANNEL NUMBER.
WHEN THE CHANNEL IS SET CORRECTLY
THE LIGHT WILL FLASH 3 TIMES.
Key.
Key again.
key to cycle through the channel
Light will flash 3 times to show the channel has
1. Insert 4x AAA Batteries (Included).
2. Connect the right motor to the
batteries.
3. Connect the left motor to the
batteries.
Note: If more than one set of Ingenious
Machines are being used, set different
channels on each remote.
CHANGE CHANNEL
BUTTON
TURN LEFT /
RIGHT BUTTON