Instructions Part; Operating Instructions; Robot Features - THINK GIZMOS TG542 ROBO SHOOTER Mode D'emploi

2. INSTRUCTIONS PART 1

2.1 Operating Instructions

● Switch the main switch on the Robot to 'ON', and press the 'GO' button on the Robots
chest. The robot will respond by saying "Greetings Master! I am yours to command", and
his eyes will flash confirming he is awaiting your orders.
● Use the remote control or the program buttons on the Robots chest to control the robot.
● If you don't issue orders to him for a period of time he will say "Mission Accomplished"
and go into sleep mode.
To get him out of sleep mode you should press 'GO' on his chest again.
●

2.2 Robot Features

Programmable Function:
After being turned 'ON', press the 'GO' button and the light
on the gun will flash. Then press the buttons according to the
actions you want him to do. Press the 'GO' button again and he
will follow the actions.
Turn Function:
Press the buttons on the controller, the robot will
turn to the left and to the right correspondingly.
4
Infrared Control:
For maximum performance, always aim the remote
control at the receiver on the robot's head.
Dance Function:
Press the button on the controller, and the robot
will do a cool dancel.