Optika Italy H Serie Manuel D'utilisation page 26

Global: Used for setting digits behind the decimal point for measurement results;
Calibration Line Width
Color
EndPoint
Point, Angle, Line, Horizontal Line, Vertical Line, Rectangle, Circle, Ellipse, Annulus, Two Circles, Polygon, Cur-
ve:
Left-click the beside the measuring patterns mentioned above will unfold the corresponding attribute settings
to set the individual property of the measuring objects.
Names such as 10X, 40X, 100X are based on magnification of the microscopes. For
Name:
continuous zoom microscopes, ensure that the selected magnification coincides with the scale
alignment line on the microscope zoom knob;
Pixels per meter. Devices like microscopes have high resolution value;
Resolution:
Click the Clear All button will clear the calibrated magnifications and resolutions;
Clear All:
Click Delete to delete the selected item for specific resolution.
Delete:
Figure 15 - Measurement Settings Page
Used for defining width of the lines for calibration;
Used for defining color of the lines for calibration;
Used for defining shape of the endpoints of lines for calibration.
Type:
Null: Means no endpoints
Rectangle: Means rectangle type of endpoints. It makes alignment more easily
Figure 16 - Magnification Calibration Management Settings Page
Page 26