Quick Instructions For C-He Camera; Hdmi Mode - Optika Italy H Serie Manuel D'utilisation

7.2

Quick Instructions for C-HE camera

Before turning on the camera, please connect the standard C-mount camera to the camera adapter and insert it
into the microscope's trinocular port.
① HDMI connector
② USB mouse connector
③ Power supply plug

7.2.1 HDMI Mode

1. Plug the HDMI cable into the HDMI port ① to connect the C-HE camera to HDMI display;
2. Plug a USB mouse into USB Mouse port ② to get control of the camera by using built-in software LiteView;
• The camera cannot be connected to a PC in any way. The available USB port is used to connect the
mouse.
3. Insert SD card into SD Card Slot ④ for saving captured images;
4. Plug 12V/1A power adapter into DC 12V slot ③ to supply power for the camera. The LED Indicator ⑤ will
turn into blue;
5. Move mouse cursor to the left side of the video window, a Camera Control Panel will appear. It includes
Manual/ Automatic Exposure, White Balance, Sharpness and other functions, please refer to 8.1 for details;
6. Move mouse cursor to the bottom of the video window and a Camera Control Toolbar will appear. Operations
like Zoom In, Zoom Out, Flip, Freeze, Cross Line, and etc. can be achieved. Please refer to 8.2 for details.
①
⑤
③
Figure 8 - C-HE Rear Cover
④ SD card slot
⑤ LED indicator
Page 15
②
④