The Measurement Toolbar - Optika Italy H Serie Manuel D'utilisation

6.3

The Measurement Toolbar

The Measurement Toolbar will pop up when moving mouse cursor to any place near the upper side of the video
window.
Icon
Float/ Fix switch of the Measurement Toolbar
Define measuring object in Show up/ Hide mode
Select the desired Measurement Unit
Choose the same Magnification as the microscope to ensure accuracy of measurement result when
measurement unit is not in Pixel units
Object Select
Point
Angle
Arbitrary Line
Parallel
Horizontal Line
Vertical Line
Rectangle
Circle
Ellipse
Annulus
Two Circles and Center Distance
Arc
Polygon
Curve
Make Calibration to determine the corresponding relation between magnification and resolution, this
will establish the corresponding relationship between measurement unit and the sensor pixel size. Ca-
libration needs to be done with the help of a micrometer. For detailed steps of carrying out calibration
please refer to ProView help manual
Export the measurement information to CSV file(*.csv)
Delete All the Measurement Objects
Figure 8 - The Measurement Toolbar
Page 12
Function