Panasonic GP-US932CSAE Mode D'emploi page 22

B PHASE
B GAIN
USER AREA
RET END
z
Display the color to be adjusted in the screen center
as large as possible.
x
Select the axis close to the target color with use of
"MATRIX" on the "SCENE FILE" screen. The axis is
selectable from the following:
USER (default), B-Mg, Mg, Mg-R, R, R-Ye, Ye, Ye-G,
G, G-Cy, Cy, Cy-B, B
c
Press the [SEL] button after axis selection.
→ The "MATRIX" screen appears.
v
To perform fine adjustment, adjust "PHASE" (hue) and
"GAIN" (chroma) with use of the [e] or [f] button.
When the color axis is unclear
When "USER AREA" is selected on the "MATRIX" screen,
the axis is automatically displayed by selecting a color on
the screen.
Color selection is performed on the color detection
screen.
The white rectangle cursor is blinking to select a target
color on the color detection screen.
<Color matrix splitting chart>
Color detection screen
* This chart is a guideline for displaying the closest
axis at adjustment.
R-Ye
Ye
Ye-G
G
22
"MATRIX" screen
** MATRIX ** USER
.... ....
0
|
– +
.... ....
0
|
– +
*
Cy-B
MCursor (blinking)
Mg-R
R
Mg
B-Mg
B
Cy-B
Cy
G-Cy
z
Point the camera at the center of the subject with
which the color is detected.
If the camera is immovable, move the rectangle cur-
sor to the area with the target color with use of the
[g], [h], [e] and [f] buttons.
Note:
• Every time the [SEL] button is pressed, the size of the
rectangle cursor changes in the order of large →
medium → small.
Select a size to meet the subject size.
x
Hold down the [FREEZE
onds or more.
→ The "MATRIX" screen appears again.
c
To perform fine adjustment, adjust "PHASE" (hue) and
"GAIN" (chroma).
For example, the adjustment of "PHASE" or "GAIN" of
"Cy/Cy-B" on the following screen provides the simul-
taneous adjustment of "PHASE" or "GAIN" of the adja-
cent axes "Cy" and "Cy-B" in the color matrix splitting
chart above.
"MATRIX" screen
** MATRIX **
Cy/Cy-B PHASE ....
Cy PHASE
Cy-B PHASE
Cy/Cy-B GAIN ....
Cy GAIN
Cy-B GAIN
USER AREA
RET END
Note:
• When the color on the axis in the color matrix splitting
chart is detected, the adjacent axes are not dis-
played.
[CHROMA GAIN] Adjusts chroma gain.
Be sure to view a vector scope or a color video monitor
when the chroma gain is adjusted with use of the [e] or
[f] button.
When the level indicator moves in the "+" direction, the
chroma level becomes higher. When the level indicator
moves in the "–" direction, the chroma level becomes
lower.
[TOTAL PED] Adjusts the pedestal level.
Be sure to view a waveform monitor or a color video mon-
itor when the pedestal level (black signal level) is adjust-
ed with use of the [e] or [f] button.
When the level indicator moves in the "+" direction, the
image becomes brighter. When the level indicator moves
in the "–" direction, the image becomes darker.
MENU ] button for 2 sec-
USER
....
| 0
.... ....
0
|
.... .... 0
|
....
0
|
.... ....
| 0
.... ....
0
|
*