Scene File Setting [Scene File] - Panasonic GP-US932CSAE Mode D'emploi

8. Scene file setting [SCENE FILE]

Registration of details, gamma, hue, etc. as a scene file
in accordance with an installation location allows users to
employ the registered contents only by pressing the
[SCENE] button on the front face of the CCU.
Up to 3 scene files can be registered.
Scene file registration is performed on the "SCENE FILE"
screen. When a scene file to be registered on the top
screen, "SCENE FILE", in the SETUP menu is selected
and the [SEL] button is pressed, the "SCENE FILE"
screen appears. The "SCENE FILE" screen consists of 2
pages of contents. The selected scene file number
appears beside the screen title.
The characters specified at "FILE LABEL" are displayed
at "LABEL". The default is blank.
"SCENE FILE" screen
LABEL: ................
DTL MODE
RED DTL
GAMMA
KNEE
BLACK STRETCH
D-RANGE
WHITE CLIP
RET END
LABEL: ................
FLARE COMP
DNR
MATRIX
CHROMA GAIN .....
TOTAL PED
FILE LABEL
AWC MEMORY
RET END
[DTL MODE] Specifies the details.
The band and level of the edge correction are specified.
"SCENE FILE" screen
LABEL: ................
DTL MODE
RED DTL
GAMMA
KNEE
BLACK STRETCH
D-RANGE
WHITE CLIP
RET END
"DTL MODE" screen
PATTERN
DTL BAND
DTL LEVEL
RET END
20
Scene file number
** SCENE FILE 1 ** P1
*MANU
OFF
.... .... 45
|
*MANU
OFF
NORMAL
.... .... 110
|
** SCENE FILE 1 ** P2
OFF
LOW
*USER
... 160
|
.... .... 76
|
*OFF
1
** SCENE FILE 1 ** P1
*MANU
OFF
.... .... 45
|
*MANU
OFF
NORMAL
.... .... 110
|
** DTL MODE **
USER
. . . .
4
|
– +
.... .... 16
|
– +
z
Move the cursor to "DTL MODE" of the "SCENE FILE"
screen and press the [SEL] button.
→ The "DTL MODE" screen appears.
x
Move the cursor to "PATTERN", select a pattern from
among "1", "2" and "3" and press the [SEL] button.
→ The setting contents of "DTL BAND" and "DTL
LEVEL" are applied to "USER".
The band and level can be manually adjusted in
"USER". Perform adjustment on an as-needed
basis.
Be sure to view a monitor when the adjustment is
performed.
Note:
• The band and level can also be adjusted directly
without applying any of the patterns, "1", "2" and "3" to
"USER".
c
Move the cursor to "DTL BAND" and adjust the band
with use of the [e] or [f] button.
When the level indicator moves in the "+" direction,
the edge becomes thinner (the band becomes high-
er). When the level indicator moves in the "–" direc-
tion, the edge becomes thicker (the band becomes
lower).
v
Move the cursor to "DTL LEVEL" and adjust the level
with use of the [e] or [f] button.
When the level indicator moves in the "+" direction,
the image becomes sharper. When the level indicator
moves in the "–" direction, the image becomes softer.
Note:
• Jaggies may appear on the edge of a photographic
subject, but this phenomenon is not abnormal. If this
phenomenon is not favorable, decrease "DTL BAND"
or "DTL LEVEL" to adjust the image quality.
[RED DTL] Adjusts the enhancement of red
edge.
The red edge enhancement level of images through the
camera is adjusted.
The enhancement level is selectable from the following:
OFF (default): No edge enhancement is performed on
the red portion.
LOW: The low level of edge enhancement is performed
on the red portion.
HIGH: The high level of edge enhancement is performed
on the red portion.
[GAMMA] Adjusts the gamma level.
Be sure to view a waveform monitor or a color video mon-
itor when the gamma correction is performed.
Move the cursor to "GAMMA" and adjust the gamma level
with use of the [e] or [f] button.
When the level indicator moves in the "+" direction, the
correction level becomes larger. When the level indicator
moves in the "–" direction, the correction level becomes
smaller.