Sony PXW-X180 Mode D'emploi page 33

Uploading an original file on an SxS
memory card
1
Connect a device to the camcorder via a
wireless LAN, start the browser on the
terminal device, then access the
camcorder from the browser (page 4).
2
Change the camcorder to file transfer
mode.
Perform "File Transfer" in "File Transfer" of
the System menu to change the camcorder to
the dedicated mode for uploading the original
file.
3
Display the file list screen to select the
file.
Touch " " > "Media Info" > "Slot A" (for
a memory card in the slot A) or "Slot B" (for
a memory card in the slot B) on the browser
screen of the device.
The "Slot A" or "Slot B" screen appears.
Example: "Slot A" screen
4
Select the file.
Select the file by touching the file. To cancel,
touch the file again.
5
Touch "Transfer."
The server that you set to the default server at
"Default Server" in "Register the server for
uploading" (page 17) appears.
To change the server, touch a server to
display the server list, then select the server.
Input the directory for the server to
"Directory" if necessary.
6
Touch "Transfer."
The camcorder starts uploading the selected
file.
To cancel uploading, touch "Cancel."
Checking the file uploading
You can check the upload status on the "Job List"
screen that is displayed by touching "Job List" on
the "SD Card," "Slot A," or "Slot B" screen
(page 18).
Transmitting streaming
video and audio (PXW-
X180 only)
You can transmit the video and audio captured/
played back with the camcorder via Internet or
local network.
Preparations
To connect to the Internet
Connect the camcorder to the Internet by
following the procedure of "Connecting to the
Internet (PXW-X180 only)" (page 8).
To connect to the local network
Connect the camcorder to the local network by
following the procedure of "Connecting to Other
Device via Wireless LAN (PXW-X180 only)"
(page 4).
GB
GB
11