Cut Off Saw Blade Replacement - Greenlee C3 Auto Whip Manuel D'instructions

Service (con't)

Cut Off Saw Blade Replacement

1. Open the Acrylic Door
2. Place an open end wrench on the flats of the coupler behind the Cut Off Saw Blade.
3. Loosen and remove the 3/8-16 x .75" serrated flange hex head cap screw securing the
blade.
NOTE – THIS SCREW HAS LEFT HANDED THREADS.
4. Remove the Washer.
5. Remove the Cut Off Saw Blade.
6. Position the new Cut Off Saw Blade with the teeth oriented as Shown Below and install
by repeating steps 5 thru 1 above.
Enlarged View
Greenlee Tools, Inc.
C3 Auto Whip Clad Cable Cutter
C
Blade Rotation
35
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
B
D