Features; Connecting Cables; Example Of System Configuration - Sony BRU-300 Mode D'emploi

Features

The BRU-300/300P Optical Multiplex Unit is designed
to connect the BRC-300/300P 3CCD Color Video
Camera.
Long-distance transmission via optical fiber
cable (BRC-300/300P only)
The BRU-300/300P is equipped with a camera
connector to allow the connection of multiplex optical
fiber cable. You can connect the BRC-300/300P camera
from up to 500 m (1,640 feet) away by inserting the
BRBK-303 Optical Multiplex Card into the camera and
using the CCFC-M100 Optical Fiber Cable.
Two interface card slots equipped
The BRU-300/300P is equipped as standard with a
composite video output (BNC) and S video output. In
addition to these connectors, two interface card slots
allow the unit to be equipped with various analog signal
outputs such as RGB and component video outputs, and
an SDI signal output conforming to SMPTE259 serial
digital interface standards.
External sync signal input/output equipped
When multiple BRC-300/300P cameras are connected
via the Optical Fiber Cable, the video signal can be
synchronized by inputting the video signal into the
external sync input connector.
Long-distance, high-speed transmission via
VISCA RS-232C/RS-422 communication
protocol
Up to seven VISCA-controllable cameras can be
connected in daisy chain.

Connecting Cables

Use the following connecting cable to connect devices
in this system.
Cable
RS-232C cable
(3m (10feet))
RS-232C cable
4
GB
Features
Part No. Number
1-590-879-3X 1

Example of System Configuration

1 2 3 4 5 6 7 8 9
1 2 3
OFF ON
75 IR SELECT
VISCA RS-422
EXT SYNC IN VIDEO S VIDEO IN VISCA RS-232C OUT
BRBK-303 Optical
Multiplex Card
CAMERA
to VIDEO
(or S VIDEO)
75-ohm coaxial
cable (or S-
video cable)
Video monitor, etc.
VISCA RS-232C
RM-BR300 Remote Control Unit
* The VISCA RS-422 connection is also available if you use the
VISCA RS-422 connectors.
BRC-300/300P
camera
to AC outlet
DC IN
12V
CCFC-M100 Optical
Fiber Cable
to AC outlet
BRU-300/300P
Optical Multiplex
Unit (this unit)
VISCA RS-232C IN
RS-232C cable
(Sony: 1-590-879-3X)
(supplied with the RM-
BR300)*
to AC outlet