Technical Specification; Dimensional Drawings - Wamsler TOMO Mode D'emploi

a stop-cock close to the stove. Of course, heating is also possible with the air of
the room – see: Item 2.2 (Germany).
The stoves use room air for combustion, and a sufficient supply of combustion air
is therefore essential. The air pressure in the room of installation must not be
negative. Please observe the relevant technical rules / regulations and any addi-
tional information when operating your appliance in combination with air condi-
tioning systems (for ex. ventilation systems, exhauster hoods, pneumatic con-
veyor systems etc.).
Only for TYP18814 OKU
Ø 80 mm

3. Technical specification

3.1 Dimensional drawings

TYP 18813 TYP 18814
27