Replacing Light Bulbs - Zephyr Essentials Twister AK8000AS Guide D'utilisation, D'entretien Et D'installation

Masquer les pouces Voir aussi pour Twister AK8000AS:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

www.zephyronline.com

REPLACING LIGHT BULBS

CAUTION: Light bulb becomes extremely hot when turned on.
DO NOT touch bulb until switched off and cooled. Touching hot bulbs could cause serious burns.
Make sure all power is turned off and bulbs are not hot.
Remove by turning bulb counter clockwise. Note: Bulb does not unscrew; it turns 60 degrees, stops and
falls out.
diameter of the bulb or use a rubber/latex glove and turn counter clockwise.
Replacement bulbs are available at specialty lighting stores.
AK8000AS-ES:
Purchase type: 13w Fluorescent, GU-24 CFL, STS T3 13GUS
For Zephyr part numbers please turn to page 17 of the manual.
AK8000AS & AK8100AS
AK8000AS-ES
14

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Twister ak8000as-esTornado i ak8100as

Table des Matières