LENCO DIR-200 Mode D'emploi page 24

control briefly, then select one of the listed preset stations. The
screen will show
( 1,
You can store up to 10 of your favourite stations to the memory. This
will enable you to access your favourite stations 1-0 quickly and easily
by using the number buttons on the remote control.
5.6.3. Now playing information
While the stream is playing, the screen shows its name and DLS
(Dynamic Label Segment) information broadcast by the station and
the real-time information such as programme name, track title and
contact details. Stereo broadcasts are indicated with an icon at the
top of the screen. To view further information, press MENU/INFO
the device or INFO
Each time you press INFO
which cycling through DLS text, programme type, ensemble
name/frequency, signal strength/error rate, bite rate/codec/channels
and today's date.
5.6.4. Settings
Dynamic range compression (DRC)
•
Allow you to compress the audio dynamic range (off/ low/ high),
if you are listening to music with a high dynamic range in a
noisy environment.
Station order
•
Allow you to rearrange the order of the DAB+ station list to be
either Alphanumeric, Ensemble or Valid.
Ensemble lists groups of stations that are broadcast together on
the same ensemble. Valid lists valid and stations first,
alphanumerically, then off-air stations.
5.7. 5.7. FM FM
5.7. 5.7. FM FM
FM radio mode receives analogue radio from the FM band and displays
RDS (Radio Data System) information about the station and broadcast's
location.
n
2 etc) at the bottom right.
INFO INFO
INFO on the remote control.
INFO INFO, another set of information is displayed, INFO
24
MENU/INFO MENU/INFO
MENU/INFO on