Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS
5. Cabinet Installation
The wall oven can tip when the door
is open. The mounting brackets supplied with the
wall oven must be attached to the cabinet and the
appliance to prevent tipping of the wall oven and
injury to persons.
Mounting Brackets Installation Instructions
1. Unpack the wall oven. Remove the bottom trim taped
on the oven side panel. Find the 2 mounting brackets
and screws included in the literature package.
2. Install the mounting brackets in the wall cabinet as
shown on Figure 5. Note: To prevent damage to
cabinet, it is recommended to drill 1/16" (0.16 cm) dia.
pilot holes before installing the mounting brackets.
See addendum for anti-tip screws installation
at the end of this booklet (if necessary).
(and Optional Electric or Gas Cooktop Combination)
F see figure 1
Mounting
Brackets
22 3/16" *
(56.4 cm)
Single Wall ovens
F see figure 2
Mounting
Brackets
43 5/8" *
(110.8 cm)
Double Wall ovens
* If wood shims are installed please calculate this
dimension from the top of the shim to the middle of
the mounting bracket.
6
H
see figure 1
H
see figure 2
Figure 5
Publicité
Table des Matières
