Manual Mode; Pool Data Menu; Stand-Alone Set-Up - Pentair Water Pool and Spa IntelliFlo VF Variable Flow Guide De Démarrage Rapide

Manual Mode

Pool Data Menu

®
MENU 12:15
Pool Data Pool Data
6
Stand Alone Set-Up

Stand-Alone Set-Up

(no controller or appliance communicating with IntelliFlo)
Manual Mode is used for fi rst-time programming, service and testing, or whenever you need to
quickly measure or set fl ow rates for equipment and features.
For more information, please refer to the IntelliFlo VF Installation and User's Guide.
If the IntelliFlo language is not set, select your language:
Press Menu to access Pool Data.
Press Up/Down arrow to select Language.
Press Select. Press Left/Right arrow
Press Enter to save.
Note: Before initial IntelliFlo VF programming, set system valves for your pool
circulation mode.
Setting Pool Parameters in Pool Data mode
Pool Data mode is used to give IntelliFlo information about pool volume and water temperature.
You also set the pump language, pump address, pump volume and set the water temperature.
Press Menu to access Pool Data.
Press Up/Down arrow to select Pool Volume.
Press Select to set parameters. Press
Pump Address (not used for stand-alone )
Enter pool volume of water. The setting is from 4 - 3785 m
to select: Nederlands, Italiano, Francais, Deutsch, Spanish, English.
Enter to save.
3 .