Turnover/Cycles Per Day - Pentair Water Pool and Spa IntelliFlo VF Variable Flow Guide De Démarrage Rapide

Turnovers Per Day
®
Filter 12:15
1
Turnovers Per Day
Cycles Per Day
®
Filter 12:15
1
Cycles Per Day
10
Setting Priming Time – Filter: Turnovers/Cycles
Press Down arrow to scroll to Turnovers.
This setting establishes number of times the entire volume of water will turn over per day.
One turn per day is recommended for energy conservation and for most common pool
requirements. This setting can also be modifi ed to easily increase system fl ow if required for
more effective skimming. You can set up to eight turns per day.
Press Select to access Turnovers Per Day.
Press Left arrow and Right arrow
Change values by pressing Up arrow
When value is set, press Enter
Press Down arrow to scroll to Cycles.
IntelliFlo VF uses the Cycles Per Day setting to calculate how much time it has to complete turn-
overs/fi ltration. You can program up to four start/stop cycles per day. For instance, the pump can
fi lter from 9:00 to 12:00 and then from 14:00 to 21:00.
Press Select to access Cycle value.
Press Left arrow and Right arrow
Change values by pressing Up arrow
When value is set, press Enter
to select digit to modify.
and Down arrow.
to confi rm value and save changes.
to select digit to modify.
and Down arrow.
to confi rm value and save changes.