Operator Control Panel - Pentair Water Pool and Spa IntelliFlo VF Variable Flow Guide De Démarrage Rapide

Operator Control Panel

1 Filter/LED – Starts Filter mode.
The LED is on when Filter mode is active.
2
Vacuum/LED – Starts Vacuum mode.
The LED is on when Vacuum mode is active.
3
Backwash/LED – Starts Backwash mode.
The LED is on when Backwash mode is active.
4
Manual/LED – Starts Manual mode. The LED is on when
Manual mode is active.
5
Select – Displays menu items or enters edit mode for chang-
ing a value on line two of display.
6 Escape – Go up to next menu level, or stop editing the cur-
rent setting.
7
Menu – Access menus if pump is stopped.
8
Enter – Saves current menu item setting, acknowledges and
clears alarms and warnings.
9
Arrows
Up – Move one level up in the menu tree or increase a digit
when editing a setting.
Down – Move one level down in the menu tree or decrease a
digit when editing a setting.
Left – Move cursor left one digit when editing a setting.
Right – Move cursor right one digit when editing a setting.
10
Feature 1 – Starts Feature 1 mode.
The LED is lit when mode is active.
11
Feature 2 – Starts Feature 2 mode.
The LED is lit when mode is active.
12
Start/Stop – Start or Stop the pump. When the LED is lit
it indicates the pump is currently running or in a mode to
start automatically.
13
Reset – Reset alarm or alert.
14
LEDs
On – This green LED is on when IntelliFlo is powered on.
Warning – This LED is on if a warning condition is present.
Alarm – This LED is on if an alarm condition has occurred.
15
Control Panel LCD Display
Line 1 – Mode and time.
Line 2 – Data.
Line 3 – Name of data in line 2.
Line 4 – Run status.
5