Philips SmartPro Active FC8832 Mode D'emploi page 9

WiFi connection and app
Operating system requirements
WiFi specifications
Connecting WiFi router and robot
Downloading app and connecting app and robot
Minimum requirements regarding operating systems:
- iOS: 11 or higher
- Android: 5.0 or higher
- The robot is designed to be connected to standard consumer routers
that use WEP, WPA-PSK, WPA2-PSK encryption keys, or no encryption
(open WiFi network).
- Connecting the robot to public hotspots, office networks or hotel
networks is not possible in most cases.
- The robot will not work with 5 GHz routers. If you encounter problems
with connecting the robot to the router, please check if your router can
also be changed to the 2.4 GHz setting.
1 When you take the robot out of the box, the WiFi icon starts to flash
orange.
-
When the WiFi icon turns solid blue, the robot is connected to the WiFi
router.
2 If there is no connection between the robot and the WiFi router, check if
there is an active WiFi signal. If not, check if the WiFi router is working. If
there is a WiFi signal, start downloading the app and then connect app
and robot.
1 Search for 'Clean Home+' in the Apple App Store or in the Google Play
Store.
2 Download and install the Clean Home+ app.
English
11