Section 3 − Installation; Specifications; Removing Mig Gun From Handler 210 - Hobart Welders Spool Gun DP 3035-10 Manuel Du Propriétaire

3-1. Specifications

Approximate
Wire Diameter
Wire Feed
Range
Range
.030 Thru .035 in.
(0.8 Thru 0.9 mm)
Aluminum Wire
115 To 715 ipm
Or Flux Cored Wire
(4.1 To 20.4
mpm)
.023 Thru 035 in.
(0.6 Thru 0.9 mm)
Solid Wire

3-2. Removing MIG Gun From Handler 210

.
Hold wire tightly to keep it
from unraveling.
Rewind Wire Onto Spool, Fasten
End Of Wire To Spool
SECTION 3 − INSTALLATION
Cooling Maximum
Method Spool Size
Air 4 in. (102 mm)
Cooled Diameter
Cut Off End Of Wire
Loosen Thumbscrew, Disconnect Gun
Trigger Plug, And Pull Gun From Unit
Weld Circuit
Overall Dimensions
Rating
Length:
100 Volts, 150
11-1/2 in. (291 mm)
Amperes, 60%
Width:
Duty Cycle
2-1/4 in. (57 mm)
Using Argon
Height:
Shielding Gas
8 in. (203 mm)
Open Pressure Assembly
Thumbscrew
Weight
3035-10 3035-20
5.0 lb (2.3 kg) 7.5 lb (3.4 kg)
Gun With Gun With
Cable Cable
Ref. 804 686-A
OM-230 261 Page 11