DeLonghi DFP735 Mode D'emploi page 8

(21) Citrus press (optional)
Use the citrus press to squeeze the juice from citrus fruits (e.g.
oranges, lemons, limes and grapefruits). (fig. 3)
cone
sieve
To use the citrus press
1 Fit the drive shaft and bowl onto the power unit.
2 Fit the sieve into the bowl - ensuring the sieve handle is
locked into position directly over the bowl handle.
3 Place the cone over the drive shaft turning until it drops all
the way down.
4 Cut the fruit in half. Then switch on and press the fruit onto
the cone.
- The citrus press will not operate if the sieve is not locked
correctly.
(22) Mill (optional)
Use the mill for milling herbs, nuts and
coffee beans.
- blade unit
- sealing ring
- jar
- sprinkler lid
Safety
- Never fit the blade unit to your
machine without the jar fitted.
- Never unscrew the jar while the
mill is fitted to your machine.
- Don't touch the sharp blades. Keep the
blade unit away from children.
- Never remove the mill until the blades
have completely stopped.
Important
- To ensure long life of your
mill, never run for longer than 30 sec-
onds. Switch off as soon as you've got
the right consistency.
- Don't process spices - they may dam-
age the plastic.
- The machine won't work if the mill is
fitted incorrectly.
- Use for dry ingredients only.
8
All manuals and user guides at all-guides.com
fig. 3
blade unit
sealing ring
jar
sprinkler
lid
To use your mill
1 Put your ingredients into the jar. Fill it no more than half
full.
2 Fit the sealing ring into the blade unit.
3 Turn the blade unit upside down. Lower it into the jar,
blades down.
4 Screw the blade unit onto the jar until it is finger tight.
5 Place the mill onto the power unit and turn to lock.
6 Switch on to maximum speed or use the pulse control.
7 After milling, you can replace the blade unit with the sprin-
kler lid and shake out your food.
- The sprinkler lid is not airtight.
Hints
- Herbs are best milled when clean and dry.
(23) Mini processor bowl
Use the mini processor bowl
to chop herbs and process
small quantities of ingredi-
ents e.g. meat, onion, nuts,
mayonnaise, vegetables,
purées,
mini
sauces and
processor knife
baby food.
blade
mini
processor
bowl
To use the mini processor bowl
1 Fit the drive shaft and bowl onto the power unit.
2 Fit the mini processor bowl - ensuring the ribs on the inside
of the mini bowl chimney align with the slots in the main
bowl chimney .
3 Place the knife blade over the drive shaft.
4 Add the ingredients to be processed.
5 Fit the lid and switch on.
Safety
- Never remove the lid until the knife blade has completely
stopped.
- The knife blade is very sharp - always handle with care.
Important
- Don't process spices – they may damage the plastic.
- Don't process hard food such as coffee beans, ice cubes or
chocolate – they may damage the blade.
Hints
- Herbs are best chopped when clean and dry.
- Always add a little liquid when blending cooked ingredi-