Hillrom Ultrafins Stirrups Instructions D'utilisation page 14

INSTRUCTIONS FOR USE
c. Position these clamps adjacent to
the patient's hip.
marked on the bottom for the
patient's left and right.
d. Insert blade on the Ultrafin mount into Easy Lock
A-40042, A-40043 or equivalent.
e. Once the stirrup is placed in the rail clamp, tighten handle securely.
WARNING: The handle must be tightened securely before use.
f. To pre-position stirrup boots, loosen
boot-locking mechanism and slide
boot along rod until top end (calf
portion) of
approximately at patient's mid-calf.
Tighten Boot Locking Mechanism
securely.
procedure for the other stirrup.
g. Position stirrups to be level with the
table by squeezing the release
handle and
downward.
Positioning Patients in Stirrups:
a. Ensure patient is positioned on O.R. table in accordance with procedure and
surgeon requirements.
b. Pre-position stirrup boots. Loosen boot-clamping mechanism and slide boot
along rod until top end (calf portion) of boot is approximately at patient's mid-
calf. Tighten clamp.
Document Number: 80024545
Version: C
The boots are
boot is located
Repeat above
moving stirrup
Page 14
Blade Clamp A-40040, A- 40041,
®
Issue Date: 06 MAR 2020
Ref Blank Template: Ver. F