Water Temperature - Samsung WF45M5500A Serie Mode D'emploi

Masquer les pouces Voir aussi pour WF45M5500A Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation
Drain
Samsung recommends a standpipe 18 in
(46 cm) high. The drain hose must be
connected through the hose clip to the
standpipe, and the standpipe must fully
cover the drain hose.
Flooring
For best performance, the washer must
be installed on a solid floor. Wood floors
may need to be reinforced to minimize
vibration and/or unbalanced loads.
Carpeting and soft tile surfaces do not
provide good resistance to vibrations and
may cause the washer to move slightly
during the spin cycle.
CAUTION
Do NOT install the washer on a platform or
a poorly supported structure.

Water temperature

Do not install the washer in areas where
water may freeze as the washer always
retains some water in its water valves,
pumps, and/or hoses. Frozen water left in
the connection parts may cause damage to
belts, the pump, and other components of
the washer.
18
English
WF5500M_DC68-03773A-05_EN.indd 18
Alcove or closet installation
Minimum clearance for stable operation:
Sides
1 in. (25 mm)
Top
17 in. (432 mm)
Rear
5.9 in. (150 mm)
Front
2 in. (51 mm)
If both the washer and a dryer are
installed in the same location, the front
of the alcove or closet must have two
unobstructed air openings for a combined
minimum total area of 72 in² (465 cm²).
Your washer alone does not require a
specific air opening.
3/15/2019 4:54:38 PM

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wf45m5100a serieWf45m5500ap/a5Wf45m5500aw/a5Wf45m5500az/a5

Table des Matières