FoodSaver V3230 Série Notice D'emploi page 7

How to
Vacuum Seal with FoodSaver
1. Begin with a FoodSaver
(or create a bag as described in the "How to Make
a Bag from a FoodSaver
2. Place item(s) in bag, allowing at least 3 inches (7.62cm)
of space between bag contents and top of bag (Fig. 1).
3. Using two hands, insert open end of bag, curl down,
into Vacuum Channel (Fig. 2).
4. Place bag end into Drip Tray (Fig. 3).
5. Lower door and lock side latch. Press Vacuum &
Seal button (Fig. 4).
6. Once Seal light goes off, unlock latch, lift door and remove
sealed bag (Fig. 5).
Vacuum Sealing System Bag
®
Vacuum Sealing Roll" section).
®
www.foodsaver.ca 1-877-804-5383
Vacuum Sealing Bags
®
Fig. 1
Fig. 2
Insert Bag
Curl Downward
Fig. 3
Fig. 4
Fig. 5
2
6