Installation; Installing The Leveling Legs - Conglom transform QL014 Manuel De L'utilisateur

Installation

INSTALLING THE LEVELING LEGS

- Remove the cabinet (A) and place it on a
soft, protective surface .
- Attach each leveling leg (D) to the bottom
of the cabinet (A) using four of the provided
screws (H).
- Gently rotate the cabinet (A) right side up.
D
A
QL014
H
6
WARNING: Always wear safety goggles
and gloves during installation
CAUTION: Do not rest or bump the
leveling legs on the side as this may
cause them to detach or break .