Using Your Refrigerator; Thermostat Setting Button; Defrost - Beko RBI6301 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5

Using your refrigerator

Thermostat setting button

The interior temperature of your
refrigerator changes for the following
reasons;
• Seasonal temperatures,
• Frequent opening of the door and
leaving the door open for long
periods,
• Food put into the refrigerator
without cooling down to the room
temperature,
• The location of the refrigerator in the
room (e.g. exposing to sunlight).
• You may adjust the varying interior
temperature due to such reasons
by using the thermostat. Numbers
around the thermostat button
indicates the cooling degrees.
• If the ambient temperature is higher
than 32°C, turn the thermostat
button to maximum position.
• If the ambient temperature is lower
than 25°C, turn the thermostat
button to minimum position.

Defrost

Fridge compartment performs full-
automatic defrosting. Water resulting
from the defrosting passes from the
water collection groove and flows into
the evaporator through the drain pipe
and evaporates here by itself.
• Check regularly to see if the drain pipe
is clogged or not and clear it with the
stick in the hole when necessary.
• Deep freezer compartment does not
perform automatic defrosting in order
to prevent decaying of the frozen
food.
• Frost formation in the freezer
compartment must be defrosted
every 6 months. It is recommended to
defrost the ice when the deep freezer
compartment is not filled too much or
is empty.
15
EN

Publicité

Table des Matières
loading

Table des Matières