Centronic Dirt Devil M2615 Instructions D'utilisation Et Consignes De Sécurité page 71

2 Unpacking and assembling
1
Fig. 8
1
Fig. 9
Proceed as follows to attach the nozzles:
1. Switch off the vacuum cleaner and pull the plug from the
mains socket.
2. Remove the nozzle from the telescopic tube (Fig. 8/1).
3. Attach the desired nozzle to the bottom end of the tele-
scopic tube (Fig. 8/1) or if necessary directly to the han-
dle (Fig. 9/1).
ATTENTION:
Using the vacuum cleaner without a nozzle attached
increases the danger of accidentally sucking in objects.
4. If possible, store nozzles not in use on the accessory
holder (Fig. 1/22). Keep the other nozzles safe and in-
accessible to children.
GB
71