emerio DH-127489.1 Mode D'emploi page 13

Cleaning the air filter (every two weeks)
Dust collects on the filter and restricts the airflow. The restricted airflow reduces the efficiency of the system and
if it becomes blocked it can cause damage to the unit.
The air filter requires regular cleaning. The air filter is removable for easy cleaning. Do not operate the unit
without an air filter, or the evaporator may be contaminated.
1. Pull out the filter from the rear of the appliance.
2. Use a vacuum cleaner to gently absorb the dust on the surface. If the filter is very dirty, wash it with water
and a soft detergent and dry it thoroughly afterwards.
3. Put the filter back.
TROUBLE SHOOTING
1. Functioning temperature
5°C ≤ Ambient Temperature ≤ 35°C
When the ambient temperature is lower or higher than the functioning temperature, the dehumidifier stops.
When the ambient temperature is low, the compressor automatically defrosts at intervals; during defrosting, the
compressor stops and the fan keeps running.
2. Before calling for service
Before contacting professional service, please review the trouble shooting list that includes common occurrences
that are not the result of a defect in workmanship or materials.
Problem
No working
Small dehumidifying
capacity
Big noises
E1
Possible Cause
Whether the power plug is connected Plug in
Whether the water tank is full
Whether the water tank is in position Place it well
Room temperature ˂ 5°C, or ˃ 35 °C
Is the filter clogged?
Is the air inlet or air outlet
obstructed?
Whether the appliance is placed well
Is the filter clogged?
Humidity sensor problem
Solution
Empty the water tank
It's the self-protection designed to protect
the unit. The machine cannot work under
such temperature.
Clean the filter
Remove the obstruction from the air outlet
or air inlet.
Place the appliance on a smooth and stable
floor
Clean the filter
Change a sensor
- 12 -