Storage; Instructions To Order Spare Parts And To Request Warranties; Instructions To Order Spare Parts; Instructions To Request Warranties - Enarco TIFON 908 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6

STORAGE

Fuel is highly flammable. It may cause injury, death or property damage.
SHUT DOWN the engine, extinguish all open flames and DO NOT smoke.
ALWAYS wipe up any spilled fuel.
For long-term storage:
-
Empty the fuel in the carburetor by running the engine with the fuel tap being closed.
-
The chemical composition of the fuel will deteriorate after prolonged storage. When the Trowel needs
to be stored for a long time, remove all the fuel from the fuel tank.
-
Also remove the fuel from the float chamber of the carburetor by draining the fuel out from the drain
plug.
-
Wash away cement/concrete accumulated on the Trowel. Clean the base and protection rings.
-
Apply a light coat of oil to prevent rust formation.
-
Cover the Trowel and store it in a dry place.
-
The Operation Handle can be disengaged for easy storage. Loosen the bolts on the connecting point
on the base plate and release the Operation Handle from the slot.
7
INSTRUCTIONS TO ORDER SPARE PARTS AND TO REQUEST
WARRANTIES
en

7.1 INSTRUCTIONS TO ORDER SPARE PARTS

1.- All spare parts request must include PART CODE NUMBER AS STATED IN THE PART LIST.
We recommend to include ITEM´S MANUFACTURE NUMBER.
2.- The identification plate with serial number and model number is located on the side of the
housing. If it is not visible, inside the house it is possible to find.
3.- Let us to know the correct shipping instructions, including the wished route and the address and
consignee's complete name.
4.- Do not return parts to the factory unless you have written permission from the factory, all
authorized returns must be sent freight prepaid.

7.2 INSTRUCTIONS TO REQUEST WARRANTIES

1.- The warranty is valid 1 year after the purchasing of the machine, The warranty will cover parts
2.- In all warranty requests THE MACHINE MUST BE SENT TO an AUTHORIZED SHOP, always
3.- The Technical Assistance Service will immediately notify you if it accepts the warranty and if
4.- The warranty will be void if any equipment has been previously handled by personnel outside an
NOTE: ENARCO, S.A. reserves the right to modify any information in this manual without prior notice.
DOUBLE POWER TROWELS TIFON908
14
with manufacturing defects. In no case the warranty will cover a malfunction due to improper
usage of the equipment.
including the complete address and name of the consignee.
requested, it will send a technical report.
authorized shop

Publicité

Table des Matières
loading

Table des Matières