Machine Operations - Enarco TIFON 908 Manuel D'instructions

5

MACHINE OPERATIONS

STARTING
1) Put left foot on stop switch panel (left foot will stop the engine).Turn
on the fuel pump valve which locate at the right of the machine.
2) Open the engine choke.
3) Turn the key and starting the engine.
4) After running 3 minutes with idle speed then close the engine
choke.
5) Trample the throttle with right feet operation the machine.
OPERATION
1) Trample the engine throttle panel increasing the blade speed.
2) Moving direction:
Forward: push 2 control bars forward.
Reserve: push 2 control bars reserve.
Right side: move 2 control bars to right side.
Left side: move 2 control bars to left side.
Turning: right hand control bar forward, left hand bar reserve to turn anticlockwise.
Right hand control bar reserve, left hand bar forward to turn clockwise.
Always look behind you to avoid hazards before moving backwards.
3) Light switch
Light switch located on the right of the chair.
4) Water pump
Water pump is installed in the underside. Switch in on the right hand control bar.
DOUBLE POWER TROWELS TIFON908
en
11