Maintenance Safety; General Safety Guidelines - Enarco TIFON 908 Manuel D'instructions

MAINTENANCE SAFETY

•
Before attempting maintenance on this machinery, know the procedure and have the correct tools.
•
Always make sure that machine is stopped and the spark plug wires and battery are disconnected
before attempting service..
•
Securely support any machine components that must be raised for service (i.e. trowel arms).
•
Never lubricate the machine or attempt service on a running machine.
•
Always allow the machine proper time to cool before servicing.
•
Keep machinery in proper running condition. Make sure that there is no buildup of concrete, grease,
oil or debris, keep all parts properly installed.
•
Keep all parts properly installed.
•
Fix damage immediately and always replace worn or broken parts.
•
Dispose of potentially hazardous waste properly. Examples of potentially hazardous waste are:
motor oil, fuel and filters. Use rigid containers for trapping these items. Do not use old food or
beverage containers, someone maybe mislead. Do not pour waste oil or fuel directly onto the
ground, down a drain or into any water source.Inquire what the proper disposal procedures are for
waste fuel and oil in your local area.

3.1 GENERAL SAFETY GUIDELINES

Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to
be used by qualified and trained personnel only. This equipment should not be operated by persons
under 18 years of age.
•
Always use proper heavy lifting techniques when moving equipment.
•
Always make sure that machines kept in proper operating condition.
•
Always have throttle position at idle while starting engine.
•
Always check to make sure that operating area is clear before starting engine.
•
Always test safety equipment including the safety engine kill mechanisms before operating
equipment.
•
Never place feet on or inside the guard ring while starting the engine.
•
Never operate this equipment without proper protective clothing including footwear.
•
Always keep clear of rotating parts when operating.
•
Never operate with belt guard or any other guards removed.
•
Never leave machine unattended while running.
•
Never smoke while refueling.
•
Exhaust fumes are lethal! Operate machine in a well-ventilated area, away from places where fumes
can accumulate.
DOUBLE POWER TROWELS TIFON908
en
5