AXXAIR metabo DC25-M1 Mode D'emploi page 22

English
 Fit the DC25 on to the machine (See para. 3.8)
 Choose the rotation speed A (it is preferable to start machining on position 1 on
the power tool), then adjust the rotation speed B.
 Check the direction of rotation (clockwise when the operator is standing at the
back of the machine).
 Put the tube in place on the machine and tighten with the tightening handle.
Note: do not touch the plate while positioning the tube
B
- 22 -
Z.I. Les Bosses
F-26800 ETOILE-SUR-RHONE
www.axxair.com
A