Electric Motor; Special Safety Instructions; Selecting The Direction Of Rotation; Mechanical Speed Selector - AXXAIR metabo DC25-M1 Mode D'emploi

Z.I. Les Bosses
F-26800 ETOILE-SUR-RHONE
English
www.axxair.com
3

ELECTRIC MOTOR

3.1 Special safety instructions:

Before using power tools, please carefully read all the AXXAIR and METABO safety
instructions.
Retain all the documentation supplied with power tools.
If you lend your power tools to anyone, make sure that they also receive this
documentation.

3.2 Selecting the direction of rotation:

The switchover slide must only be operated while the machine is at a complete stop.
Selecting the direction of rotation. When using the DC25, the switch must be as
shown in the photograph below.
IMPORTANT: The machine cannot operate when the direction of rotation switch is in the
central position.

3.3 Mechanical speed selector:

NOTE: changeover should not take place under a full load or at maximum speed.
This will extend the machine's life.
Moving the switching slide.
1 = Slow rotation speed, high torque. Recommended starting position
2 = High rotation speed.
This speed can be adjusted by the second speed selector
- 17 -