Hoover REACT Powered Reach Manuel De L'utilisateur page 13

Directions for Cleaning: Powered Stair Tool
1
Remove tool from handle.
4
To remove the brush roll,
pull the end without the
belt and then remove the
belt from the other end.
***Tools vary by model number. Refer to Hoover.com or Hoover.ca for tools included in each model.
2
Hold tool upside down
and flip clear plastic
brush guard to the
down position.
5
Cut out any hair and
remove large debris.
***
3
Push in the latch and
pull brush guard off.
6
Replace brush roll,
belt and brush guard
for next use.
11