Baninni BAGNO Mode D'emploi page 9

PREPARING THE BABY BATH BEFORE USE
POSITION 1
Step 1. Turn the bathtub upside down
Step 2. Make sure that the lock system is fully retracted.
Step 3. Make sure that the feet are fully folded
Step 4. Rotate the bathtub
Step 5. Make sure that the drain cap is completely
closed before use.
POSITION 2
Step 1. Turn the bathtub upside
down
Step 2. Open both feet until they
snap into place (Fig. 1)
Step 3. Slide the lock system out
completely to the left and
right (fig. 2 +3)
Step 4. Turn the bathtub over before
use (Fig. 4)
Step 5. Make sure that the drain cap
is completely closed before
use.
POSITION 3
Step 1. Turn the bathtub upside
down
Step 2. Open both feet until they
snap into place (Fig. 1)
Step 3. Turn the bathtub over
Step 4. Push the bathtub down with
both hands until it is fully
opened (Fig. 2).
Step 5. Slide the lock system left and
right completely out
for stability
Step 6. Make sure that the drain cap
is completely closed before
use.
LOCKSYSTEM
SUPPORT LOCKSYSTEM
fig. 1
fig. 3
fig. 1
LOCKSYSTEM
fig. 2
fig. 4
fig. 2