Metal Marks And Scratches; Damage From Sugary Spills And Melted Plastic - Cafe CEP9030 Manuel Du Propriétaire

Radiante table de cuisson
Masquer les pouces Voir aussi pour CEP9030:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Cleaning the Glass Cooktop (Cont.)

Metal Marks and Scratches

1. Be careful not to slide pots and pans across your
cooktop. It will leave metal markings on the cooktop
surface.
These marks are removable using the CERAMA
BRYTE
Ceramic Cooktop Cleaner with the CERAMA
®
BRYTE
Cleaning Pad for Ceramic Cooktops.
®

Damage from Sugary Spills and Melted Plastic

Special care should be taken when removing hot substances to avoid permanent damage of the glass surface.
Sugary spillovers (such as jellies, fudge, candy, syrups) or melted plastics can cause pitting of the surface of your
cooktop (not covered by the warranty) unless the spill is removed while still hot. Special care should be taken when
removing hot substances.
Be sure to use a new, sharp razor scraper.
1. Turn off all surface units. Remove hot pans.
2. Wearing an oven mitt:
the spill to a cool area on the cooktop.
b. Remove the spill with paper towels.
49-80833
2. If pots with a thin overlay of aluminum or copper
are allowed to boil dry, the overlay may leave black
discoloration on the cooktop.
This should be removed immediately before heating
again or the discoloration may be permanent.
NOTE: Carefully check the bottom of pans for roughness
that would scratch the cooktop.
3. Any remaining spillover should be left until the surface
of the cooktop has cooled.
residue has been completely removed.
NOTE: If pitting or indentation in the glass surface has
already occurred, the cooktop glass will have to be
replaced. In this case, service will be necessary.
15

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cep9036Cep90302nssCep90301nbb

Table des Matières