Multiple Timers; Timer Mode; Hot Light Indicator - Cafe CEP9030 Manuel Du Propriétaire

Multiple Timers

Timer Mode

For more information see Custom Settings, Timer Mode
section for Multi-Timer feature. Each burner can be
linked to a timer. Burner must be on to set the timer.
When more than one burner is on, the order of the timer
is from left to right.
To Turn ON Multiple Timers
1. Touch the Timer Select pad. The corresponding
burner power level and the display will blink. Touch
the or V arrows to adjust time. Timer automatically
starts after 3 seconds if there is no further action. The
Burner Power Level

Hot Light Indicator

A hot surface indicator light (one for each cooking
element) will glow when the glass surface is hot and will
remain on until the surface has cooled to a temperature
that is safe to touch.
49-80833
2. To set timer for the next burner, touch the Timer
Select pad. The corresponding burner power level and
the display will blink. Touch the
time. Timer automatically starts after 3 seconds if
timer is on. Repeat the steps for the remaining timers.
To Turn OFF Multiple Timers
Hold Timer Select pad for 3 seconds to cancel timer.
The corresponding burner power level and display will
blink. When the burner times out, the corresponding
timer also times out.
Hot Surface Indicator Light
or V arrows to adjust
11