General Installation - Electrolux 136936003 Instructions D'installation

General Installation

1. Use a carpenter's level to level your dryer
front-to-back and side-to-side.
2. Use adjustable pliers or universal appli-
ance wrench (See Accessories) to adjust
the leveling legs so the dryer is level
front-to-rear and side-to-side, and stable
corner-to-corner.
3. Press down on alternate corners and
sides and feel for the slightest movement.
Adjust the appropriate leg(s) so the dryer
sits solidly on the floor on ALL four legs.
Keep the leveling leg extension at a mini-
mum for best performance of the dryer.
Installation Instructions
IMPORTANT
Be sure the power is off at a circuit breaker/
fuse box before plugging the power cord
into an outlet.
4. Plug the power cord into a grounded
outlet.
5. Turn on the power at the circuit breaker/
fuse box.
6. Read the Use & Care Guide provided with
the dryer. It contains valuable and helpful
information that will save you time and
money.
7. If you have any questions during initial
operation, please review the "Avoid
Service Checklist" in your Use & Care
Guide before calling for service.
8. Place these instructions in a location
near the dryer for future reference.
NOTE
A wiring diagram is located next to the water
container behind the left cabinet panel.
13