Introduction; Validity; Standards And Statements; Description Of The Machine - Carat S-3000 Mode D'emploi

S-3000

2. Introduction

2.1 For word
This manual is made for users of the support S-3000. The manual contains information of the
assembling, operate and maintain the support S-3000.

2.2 Validity

This manual is only meant for the support S-3000. The type indication you will find on the type plate.

2.3 Standards and statements.

This manual is drawn up in accordance with the CE-marking and the relevant technical demands.

3. Description of the machine

3.1 Main ingredients

On the picture hereunder the most important main ingredients of the support S-3000 are indicated.
The support S-3000 is set up:
1. Base plate
2. Lever
3. Slide block
4. Column
5. Grip
6. Stabilize bar
6a. Stabilize locking
7. Wheels
8. Motor assembling plate

3.2 Function

3.2.1 General

The support S-3000 is used for drilling with diamond core drills. These drills are suitable for drilling in
concrete, asphalt and brick material. The function of the support is to guide the drilling machine during
the job. The maximum drilling diameter is Ø 300 mm.
3.2.2 Support
The support takes care of stable move and
gives a good conduction during a vertical move.
The column (4) is executed with an adjustable depth guide.
Interlocking of the slide part (13), synthetic re-adjustable
Slide blocks (9), libelle (10) and a level (11).
The lever (2) can be assembled at the right or the left side
and can also be used to turn the set bolts of the
base plate to lock the motor plate (8) with the check nut
(12) and to oblique adjust the column (6a & 18).
When using the grip and the wheels at the base plate can easily be moved.
10