Nikon FSB-UC Manuel D'utilisation page 17

Attaching the camera to the bracket
1. Screw the camera attaching screw ⑮ into the camera's tripod holes
tightly to integrate the camera and the camera shoe ⑰ .
(Attach the supplied non-skid pad on the shutter release button.) (Fig.
4)
2. Insert the camera shoe ⑰ into the camera shoe mount ⑱ .
Tighten the camera shoe fixing screw ⑥ to stop the camera from
rotating temporarily. (Fig. 5)
[Note]
When you want to change the camera's position after fixing it with the
camera shoe fixing screw ⑥ , please do so after loosening the camera
shoe fixing screw ⑥ again.
3. Turn on the camera.
Operate the zoom button (from wide to telephoto), and make sure the
camera's lens does not hit against the eyepiece/DS mount.
Then set the zoom at the wide setting. (Fig. 6)
Jp
Fig. 4
En
Fr
De
It
⑰
Se
Fi
No
Dk
Fig. 5
⑥
Fig. 6
17