Hoover SmartWash Pet Complete Guide D'utilisation page 15

Maintenance
How to Remove and Clean Nozzle
1
To prevent possible leaking,
remove and empty Clean
Water Tank, Dirty Water
Tank and Solution Tank.
2
With handle in upright
position, lift up on the
Nozzle release then pull
Nozzle forward to remove
from carpet cleaner.
CAUTION, pull Nozzle
carefully outwards and
not upwards.
WARNING
! !
Risk of personal injury – Brush roll may suddenly
restart – unplug before cleaning or servicing.
3
Rinse debris from Nozzle.
4
Position Nozzle onto foot,
making sure to align the
tabs at the top of the
Nozzle with the notches
inside the foot.
IMPORTANT
!
The Nozzle must be in the proper position
for the cleaner to have proper suction.
5
Slide Nozzle forward to
snap into position.
!
15