Hoover SmartWash Pet Complete Guide D'utilisation page 12

Using Your SmartWash Pet Complete Carpet Cleaner
4
Slowly move forward. The
cleaner will automatically
dispense the optimal amount
of water and cleaning solution.
5
Slowly pull backward. The
cleaner will automatically dry
your carpets by extracting the
water and cleaning solution.
12
6
When you finish cleaning but
further drying is required,
press the DRY ONLY BUTTON.
The Dry Only mode will extract
remaining water from your
carpet. Continue in this mode
until little water is visibly
passing through the Nozzle.
7
For best results, HOOVER®
recommends rinsing the carpet
with clean water only. This
will remove residual carpet
cleaning solution from your
carpets. To rinse with clean
water only, remove the Solution
Tank and then repeat steps 4
through 6.
CLEANING FLUID
SEE THE HOOVER'S SOLUTIONS
GUIDE insert or visit
Hoover.com/cleaning-solutions.