Canon imagePROGRAF TX-4000 Guide D'installation page 2

ENGLISH
• Instructions in this Setup Guide show the TX-4000 printer. Note that your printer may look different from these illustrations in some cases. However, the basic
operations are the same.
Caution
Before Setting Up the Printer
In order to ensure that this product is used safely, be sure to read the precautions.
-> Quick Guide (separate manual)
It is recommended that you reserve space of the following dimensions to allow you to work around the printer.
Check the completed image of the printer you purchased and make sure you have enough space to install the printer.
• The printer stand and roll unit may be options depending on the model. Care is required because the required space may differ depending on whether or not the
options are used.
Important
• The space required in front of the printer differs on how the basket supplied with the printer stand is used. This shows the installation space when used in the
position in the illustration.
TX-2000
Installation space (W x D x H)
• When not using the stand
59.5 x 56.5 x 40.2 inches (1510 x 1434 x 1020 mm)
• When using the stand
59.5 x 66.3 x 61.5 inches (1510 x 1684 x 1560 mm)
7.9 inches
(200 mm)
23.6 inches
(600 mm)
(When not
using the stand)
23.6 inches
(600 mm)
(When using the stand)
Set up the printer using the following procedure.
Assemble the Stand
*
Attach the Alignment Rod
Install the Printer
Attach the Roll Unit
*
Attach the Basket
*
Assemble the Stacker
*
Turn On the Printer
Install the Ink Tanks
Install the Print Head
Load the Paper
• Perform Print Head Adjustment
and Select the Connection Method
• Connect to the Printer
• Check this also after setup is complete.
Storage Locations
How to Display the Online Manuals
Confirming the Installation Space
TX-3000
Installation space (W x D x H)
70.5 x 66.3 x 61.5 inches (1790 x 1684 x 1560 mm)
5.9 inches (150 mm)
3.9 inches
(100 mm)
(When not using
the stand)
7.9 inches
(200 mm)
7.9 inches
(200 mm)
3.9 inches (100 mm)
(When using the
23.6 inches
stand)
(600 mm)
Overview of Setup
* Refer to the separate
(P.3)
manual
(P.3)
(P.3)
* Refer to the separate
(P.5)
manual
* Refer to the separate
(P.5)
manual
* Refer to the separate
(P.5)
manual
(P.5)
(P.7)
(P.9)
(P.10)
(P.11 ~ 12)
5.9 inches
(150 mm)
7.9 inches
(200 mm)
3.9 inches
(100 mm)
If an error message appears during setup or other problems occur,
refer to "Responding to Messages" on p.14.
• Windows is a trademark or registered trademark of Microsoft Corporation in the
U.S. and/or other countries.
(P.13)
(P.14)
1
TX-4000
Installation space (W x D x H)
78.5 x 66.3 x 61.5 inches (1993 x 1684 x 1560 mm)
7.9 inches
(200 mm)
23.6 inches
(600 mm)
5.9 inches
(150 mm)
7.9 inches
(200 mm)
3.9 inches
(100 mm)