Canon imagePROGRAF TX-4000 Guide D'installation page 14

Configure Wireless LAN Settings on the Printer
If you selected No in step 3 for connecting to a wireless LAN on p.11, configure the wireless LAN settings using the touch screen of the printer.
1
Once the print head adjustment has
finished, check that the following screen
appears and tap OK.
• If the following message appears, the
printer initial settings are not finished.
Note
Wait until the above screen appears.
Checking the nozzle.
Preparing the ink system.
Cleaning...
Storage Locations
A: Spare ink box
Can be used to store spare ink tanks.
• Do not place a used ink tank.
Important
B: Accessory pocket
• Can be used to store accessories such as the 3-inch paper core
attachment.
• The accessory pocket is included with the stand.
Refer to "Attach the Accessory Pocket" in the Printer Stand
Setup Guide (separate manual) for details on how to attach.
To load roll paper after setup, tap the paper settings display area from the home screen, then
instructions on the screen.
For details, refer to the Online Manual that can be accessed by the procedure in "How to Display the Online Manuals" (p.14).
2
Select and tap the connection method.
Configure the wireless LAN settings by
following the instructions on the screen.
13
3
When the home screen appears and
appears, the wireless LAN settings are
complete.
• Before using the printer, the software
needs to be installed on the computer
Note
that is connected to the printer.
Proceed to "Connect to the Printer" on
p.12.
(roll paper icon), then Replace paper, and follow the
A
B